Our Easycove adhesive is a 2-part epoxy totaling 600 ml (2- 300 ml tubes)- with approximately 20 LF of coverage per tube “set” when using 1/8” bead.
Tack time: 20 min depending on temperature
It comes with a static mixer and needs to be warm enough for the product to mix and get to the proper consistency. The overall guarantee is that it surpasses any other product on the market for bond strength when used with our cove base.
Easycove Adhesive (600 ML)
Each 4 foot section of Easycove requires 12 lineal feet of adhesive. 8 lineal feet of adhesive will be taken up in the bond channels and 4 lineal feet of adhesive will be taken up in the inside corner where the wall and floor meet. Generally three tubesets will do 60 lineal feet of 4 or 6 inch cove base (1 box)
Apply using dual cartridge 300ml x 300ml industrial caulk gun. EASYCOVE product test data is based on environmental temperatures of 75°F (24°C). Viscosity and working time are always affected by temperatures above or below that mark. When applying product – always consider the ambient, surface, and product temperature at the time and place of installation.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.